Heart Cat Quilt Block Pattern- Printer Friendly Version

Here's another 6" paper-pieced quilt block pattern that is just purr-fect for cat lovers!

Note: When paper-piecing, I cut larger pieces than I actually need to ensure that I won't have problem covering an area if I don't place it in exactly the right spot. The cutting instructions below are for larger pieces. If you'd rather cut smaller, more exact pieces, feel free to do so.

Fabric:	Size & Shape:	For:
Background	2-1/2" Square (Cut 1) Cut once diagonally for two triangles	A10
Background	2" x 5" (Cut1)	A11
Background	1-1/2" x 3" (Cut 1)	B1
Background	2" x 3" (Cut 1)	B5
Background	3" x 4" (Cut 1)	B6
Dark	3" Square (Cut 1) Cut once diagonally for two triangles	A1
Dark	2-1/2" Square (Cut 1) Cut once diagonally for two triangles.	A4, A5
Dark	3-1/2" Square (Cut 1) Cut once diagonally for two triangles	A7, A8
Dark	2" x 5" (Cut 1)	A9
Dark	2" Square (Cut 1) Cut once diagonally for two triangles	B2, B3
Dark	2-1/2" x 3" (Cut 1)	B4
Medium	3" Square (Cut 1) Cut once diagonally for two triangles	A2, A3
Medium	4" x 5" (Cut 1)	A6

Step 1: Print out the paper foundation pattern. Cut out each of the two units just outside of the dashed lines of the seam allowance.

Step 2: Using a VERY short stitch length setting on your sewing machine, paper-piece each unit following the numbers on the printed foundation.

Step 3: When both of the two units have been pieced, carefully trim away the excess paper and fabric by cutting on the dashed lines of the seam allowance.

Step 4: With right sides together, layer Unit B on Unit A. Pin in place, then stitch together using a 1/4" seam allowance. Remove the paper from the seam allowance (on both sides) and press this seam open.

Step 5: Carefully remove the paper from the back of the block and you're done!